• Well-known advantages

Vibratory bowl feeder is a kind of auxiliary automatic feeding device , that can automatic sort and order workpiece as direction and speed demand. 

It can not only used together with automatic production line, but also to support operator to save manually sort and pick up time.

• The working principle 

there is a feeder bowl below the vibratory bowl, which can make the bowl vibrate makes the oscillating vibration around its rotatary direction.  

The parts in the hopper are subjected to this vibration and follow the spiral. 

The purpose of its work is to arrange the disordered workpieces automatically tidy and orderly through vibration, and accurately feed them to the next step. 

It is a kind of high-tech products nowadays.

• The composition of  vibratory bowl feeder

Vibratory bowl feeder / feeder drive / line feeder / controller.

• Features and Benefits

1. Automatic feeding as manufacture demand, flexiable adjust speed and counting setting.  Improve work efficiency and reduce operational errors.

2. Either can automatic feeding to the machine, or assist for operator fast manual sorting, 

3. Not only can be applied to small parts, but also can be applied to parts with a certain weight.

4. Working not affected by any environment, ensure the safety of personnel operation.

5. For small differences workpieces, through the method of replacing the bowl to achieve a quick and universal effect.

6. For direction with tiny differences workpiece, through add camera and other automatic technique to achieve feed out with correct direction.

7. Controller brand can be demand by customer.

Vibratory Bowl Feeder Parameter

Vibratory Bowl Feeder Drawing draft

Use and Maintenance

1. Check if there are any loose fasteners on the host

2. Make sure that the vibration-reducing elements are aligned up and down and that the upper and lower holes correspond to each other.

3. After the height and level of vibratory bowl feeder are adjusted, fasten the lower seat on the bracket or fixing plate

4. Leave a certain clearance when the exit of the vibratory bowl feeder meets the requirements to avoid affecting the vibration effect

5. The vibratory bowl feeder is the electrical plug installed on the control box, pay attention to waterproof and oil. After connecting 220V power, open the switch, slowly turn the potentiometer (adjustable rheostat), and gradually reach the required amount of feed. Before turning on the power, be sure to adjust the potentiometer to the minimum position so as not to damage the electrical components such as transistors

6. After two years of normal operation of the vibratory bowl feeder, the components of the chassis should be disassembled, the dust should be wiped off, and the dirt should be cleaned and re-commissioned so that the required amount of feed can be achieved.

How To Pruchase A Vibratory Bowl Feeder? 

In order to match the most suitable vibratory bowl feeder for you, we should know the detail requirement . Like:

1..... the component's picture,dimension, 3d drawing will be better.

2.... what's the speed you need per minute？(for example: 30pcs/min)

3.....what's the rotating orientation do you need of the bowl feeder? Clockwise or counter clockwise?

4.....what's the output orientation of the component do you need? (horizontal or vertical? the front side or the back side? etc)

5....do you also need the linear feeder, baseboard or hopper for the bowl feeder?

6....you component material? metal or plastic? etc.

Once we get this information, we can comment on it quickly, which will enhance the efficiency of our both party.